High Performance Big Block Cadillacs
September 09, 2010, 09:35:31 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Login Register  
Pages: [1]
  Print  
Author Topic: UPDATE: Please Read  (Read 173 times)
~JM~
Shop Keeper
C5
*****
Posts: 1643


« on: March 01, 2010, 12:54:56 PM »

I've made a few changes & performed the usual board maintenance.

Some of you have received a promotion as I have reduced the minimum post count for the "Locals Only" area. Please cruise around when you have a chance & let me know if you find any problems. I apologize for the pic gallery still not working. I'm stumped guys. I've received offers of help, but that would require me to hand over the keys to someone else & let them drive. I really don't like to let anyone else drive or ride any of my vehicles & I feel the same towards the board.

I appreciate the time & posts that each of you have contributed to the board. It could not be a forum without you.

Thanks
~JM~
Logged

PS. You don't have enough cam. Grin

...Summit has a kit for $99.... Shocked
sMiles
C4
****
Posts: 299


« Reply #1 on: March 01, 2010, 04:29:13 PM »



Thank you, John,  for the time, effort, and expense you provide to our benefit in the operation of this board.

You are appreciated.
Logged
ST Dog
C4
****
Posts: 498



« Reply #2 on: March 01, 2010, 08:05:10 PM »

I apologize for the pic gallery still not working. I'm stumped guys. I've received offers of help, but that would require me to hand over the keys to someone else & let them drive. I really don't like to let anyone else drive or ride any of my vehicles & I feel the same towards the board.

Your choice. Unlike a car, you can fully backup the forum,  then revoke privileges when you wish and repair any damage that might occur.
You can even setup a special account that has the permissions needed to do a certain task, but not other permissions.

On one forum I can do 95% of the stuff a full admin can. But I cannot make myself an admin or remove permissions from an admin.
Logged

dave brode
C5
*****
Posts: 921

11.66 at 113.96 with 1.59 sixty


« Reply #3 on: March 03, 2010, 04:12:07 PM »

JM,

I can't help whatsoever on the board issues [can hardly turn on of these cantraptions on]. Thanks for your efforts.

Dave
Logged

'71 C-10. 11.7-1 CR 514". Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66 at 113.96. 1.59 sixty.
cadnova
C1
*
Posts: 3


« Reply #4 on: March 05, 2010, 07:57:20 PM »

HI I AM NEW HERE BUT WANT TO THANKYOU FOR THIS WONDERFUL INFORMATION AT HAND!!!  AND FOR ALL THE TIME AND WORK TO PUT ALL THIS TOGETHER THANKS AGAIN .....AMERICAN MADE CADDYS ROCK Grin
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!