High Performance Big Block Cadillacs
November 17, 2017, 05:38:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Login Register  
Pages: [1]
  Print  
Author Topic: in a selling mood march 18 update  (Read 4384 times)
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« on: February 14, 2011, 12:35:54 PM »

Hello All,

JM, I hope that ebay links are ok here. I've listed some caddy related stuff. See other items.

I also have other Caddy related stuff for sale, both ebay and below.

Stock early intakes, $25 or $35 with choke stat.

Early caddy QJ $25

Late 500 pulleys brackets work nice w/o air w/2 belts $35


 New JE700 4.468" pistons from 502 BBC crate engine, would work with 7" scat [$465] or 7" olds rods. They have been used in Caddys before, and would make for a nice 9.4-1 or so 539" with 120cc heads.  Small dome, I could remove for $. I have new in the packs GM rings for them, you buy them in a pack for one cylinder. I have 9 sets [one extra]. I'll take $275 for the pistons and rings. Btw, the GM rings cost $33 per cylinder from discount GM dealers, Summit etc. Hastings has a cheaper set at $167 a set.

Low mile ported 120cc heads with 2.11/1.77. No springs, but otherwise ready to run $600. Have some springs that I could put on for a few $.

120cc head cores $75 pr, rail and no rail


'74 472 shortblock with nice looking bores $125
or, crank for $35 [no ship, pick up only]

Bunch of turbo related stuff, email me if you are serious.

I would sell the 514 engine from my truck [ran 11.66 at 114]. $3500 less intake carb. Would cost way more to duplicate. Or the shortblock only, with or without the solid cam, which would be apx 10.4-1 with 80cc heads [11.7-1 with my 68cc]. Also might sell the 87 octane late 500 that I had in the truck that went 12.97. Would sell it turn kwey with front sump pan, iron intake, hear it run for $1000, or shortblock only. H*ll, I'll sell the truck too, roller, with either engine, etc.

Plus shipping. Will add more when I think about it. Please email me rather that posting here.

Might take trades on whatever?

Thanks.
Dave Brode
Frostburg, MD
dbrode@atlanticbb.net
  
301.689.5503
« Last Edit: March 18, 2011, 06:49:24 AM by dave brode » Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
~JM~
Shop Keeper
C5
*****
Posts: 1853


« Reply #1 on: February 14, 2011, 07:54:35 PM »

Those pistons look nice!  Cool

~JM~
Logged

PS. You don't have enough cam. Grin

...Summit has a kit for $99.... Shocked
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« Reply #2 on: February 14, 2011, 08:22:43 PM »

Those pistons look nice!  Cool

~JM~

I have a set in my truck engine too that I got from Marty. They are nice for the money imo.

Dave
Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« Reply #3 on: February 16, 2011, 12:09:01 AM »

Add'l items;

New cadco cam with lifters.

"540" [290* advertised] - 234/234 at .050", .327" lobe lift, 109* LSA. Would have a dandy idle [as in, rumpity] for a mid duration cam, but still be fairly docile and snappy, even with a low static compression ratio]. $140, $185 with cadco lifters, add $25 more for cadco springs/retainers [need spring cups, I don't have those]


Potter main girdle and matching [nicely made] pu tube [stock tube will not clear]. $195 for both. I do not have the studs. Cost $360 with studs, but imo, if your studs clear nuts by 1/4" or more, it would work flat on the caps.
http://www.cadillacperformanceparts.com/index.php?option=com_content&task=view&id=26&Itemid=64

Cores, 5200 blocks, 472 crank, 500 crank. 76 and 120cc heads. Pick up here. PM or email for needs and prices there.

Please no question posts here. PM or email
Dave

« Last Edit: March 10, 2011, 08:00:57 PM by dave brode » Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« Reply #4 on: March 10, 2011, 07:02:01 PM »

Deleted items that are gone. Added some info. See all posts [not all in one]

PM or email if interested in anything.
Thanks.
Dave
Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« Reply #5 on: March 16, 2011, 02:31:55 PM »

Dave
« Last Edit: March 18, 2011, 06:49:42 AM by dave brode » Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
~JM~
Shop Keeper
C5
*****
Posts: 1853


« Reply #6 on: March 16, 2011, 08:45:36 PM »

Don't worry about it. Cool
Logged

PS. You don't have enough cam. Grin

...Summit has a kit for $99.... Shocked
dave brode
C5
*****
Posts: 1074


Best of 11.66, 113.96, 1.59 sixty


« Reply #7 on: March 18, 2011, 06:49:10 AM »

pan sold

Thanks, JM

« Last Edit: March 18, 2011, 07:30:30 PM by dave brode » Logged

3960 lb '71 C-10. 11.7-1 CR 514". PEP I beam rods floating MTS 18cc dish Probes, Elgin solid cam, home ported heads, MTS 2.19/1.84", Potter/Probe shaft rockers, edel 2115, 4781 850. Switch-pitch TH400, 12" 1800/3200 Tri-Shield convertor, 4.30 gears. Best so far of 11.66, 114.8 mph and 1.59 sixty
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!